Saturday, June 30, 2012

popular Warm Up and Stretching Exercises That Suck

I like to think of myself as the mental man's coach. I'm all the time evaluating my own programs and what's currently being taught by other professionals in the hopes of finding better, more productive ways of doing things. When it comes to my evaluation process, I use a very straightforward philosophy: "If it doesn't make scientific sense, and it defies base sense, then it must be nonsense." As I've evaluated some of the exercises ordinarily used as dynamic warm ups by coaches and stretches by Yoga and Pilates instructors, I've accomplished that many of them don't jibe with either base or scientific sense.

By deductive reasoning, I've accomplished that these movements are based on nothing but nonsense, and should be eliminated from your program. I call these movements the Stretching Don'ts, and I hope that by the end of this narrative you too will avoid them like you would avoid a warm decaf soy latte. Because of the vast popularity of these exercises, it's very likely that you're practicing some of them in your program. In addition, many of these movements are currently being taught by some well-respected coaches. Well, in this narrative I'm going to supply you with a whole bunch of science and a solid rationale for why these movements both fail to promote proper movement patterns, and, based on up-to-date research, may actually lead to dysfunction. Rather than telling you what to do and why, I'm going to try to teach you what not to do, and why not to do it. As the great Bruce Lee once said, "It's not the daily increase, but the daily decrease. Hack away the unessential."

Combination Disc & Belt Sanders

Stretching Don't #1: The Scorpion Twist This rehearsal has shown up more and more these days in yoga classes and fitness magazines. Truth be told, I have all the time idea that the scorpion was popular only because it looked cool. I have never used it because in my idea it felt very unnatural and had no real functional carryover. My personal idea aside, the basic flaw with the scorpion twist is that it requires the athlete to simultaneously enlarge and rotate the spine. This type of appeal can cause stress to the spinal facet joints. Facets are small joints that overlap like shingles on a roof, forming the back exterior of the spine. According to Dr. Wolf Schamberger in The Malalignment Syndrome: Implications for treatment and Sport (2002): "The facet joints are stressed non-specifically on side bending, back prolongation alone and back prolongation combined with rotation to the right or left." (p. 244)

popular Warm Up and Stretching Exercises That Suck

Best Price Grizzly G1183 Combination Sander 6" x 48" Belt 12" Disc 3450 RPM


Grizzly G1183 Combination Sander 6" x 48" Belt 12" Disc 3450 RPM Feature

  • 3" dust port
  • 5,000 F.P.M. belt speed
  • Base measures: 16-1/2"W x 14"D
  • Table size for belt: 7" x 12-1/2"
  • Table size for disc: 7" x 16-1/2"

Grizzly G1183 Combination Sander 6" x 48" Belt 12" Disc 3450 RPM Overview

Built to the scale and level of quality professional woodworkers demand, this heavy-duty sander features a 6" x 48" sanding belt that operates horizontally, vertically or at any angle in between. Both table supports tilt for any job.

Available at Amazon Check Price Now!

Related Products

Customer Reviews




*** Product Information and Prices Stored: Jun 30, 2012 11:15:06

Similar writings can be found later in the article: "Loads on the facet joints of the lumbar spine may play a major role in low-back pain. Shear soldiery resulting from axial rotation and flexion-extension motions (compressive shear loads) are in general transmitted through the facet joints. Although traumatic or transient shear soldiery will be resisted by both the disc and the facets, the disc's viscoelasticity causes gently applied or constant shear loads to pass through the facet joints." (Hassan A. Serhan, Ph.D.; Gus Varnavas, M.D.; Andrew P. Dooris, Ph.D.; Avinash Patwardhan, Ph.D.; Michael Tzermiadianos, M.D.; Biomechanics of the Posterior Lumbar Articulating Elements, 2007) This narrative than goes additional into the types of pain caused by facet stress and compression: "Facet joint compression leads to at least three causes of back pain: spinal osteoarthritis; bulging and herniated discs; and nerve root impingement... Because the nervous principles is responsible for many other activities, the effects of facet joint compression are very wide ranging." up-to-date investigate also suggests that you're ten times more likely to suffer sciatica pain from facet compression injuries than from herniated discs. With this type of evidence, it's easy to see why the scorpion twist is a Stretching Don't.

Stretching Don't # 2: The Windshield Wiper (or Hip Crossover) This is an rehearsal that I've seen show up in just about every principles of training as either flexibility or as "core strength" exercise. I have even seen coaches load this movement using a weighted treatment ball in the middle of the legs. I myself was using both the loaded and unloaded version of the windshield wiper until I read an narrative by Coach Mike Boyle called, Is Rotation Even a Good Idea? In that article, Boyle referenced bodily therapist Shirley Sarhmann, who in the book diagnosis and treatment of movement Impairment Syndromes Movement explained why movements like the windshield wiper contradict the biomechanics of the lumbar spine. "Rotation of the lumbar spine is more perilous than useful and rotation of the pelvis and lower extremities to one side while the trunk remain garage or is rotated to the other side is particularly dangerous." (Sahrmann, pg. 72) "During most activities, the original role of the abdominal muscles is to supply isometric hold and limit the degree of rotation of the trunk which, as discussed, is minuscule in the lumbar spine." (Sahrmann, p. 70) Sarhmann then goes on to construe in more information the rotational range of appeal capabilities at the lumbar spine: "The uncut range of lumbar rotation is ... Almost 13 degrees. The rotation in the middle of each segment from T10 - L5 is 2 degrees. The most rotational range is in the middle of L5 - S1... The thoracic spine, not the lumbar spine, should be the site of most whole of rotation of the trunk... When an individual practices rotational exercises, they should be instructed to "think about the appeal occurring in the area of the chest." (Sahramnn pg. 61-62) Taking Sarhmann's advice, we've chosen to eliminate exercises that drive spinal rotation from the bottom up in favor of an alternative distinction that's driven from the top down, shown below. This version puts less stress on the lumbar vertebrae and emphasizes rotation at the thoracic spine, which is good designed for mobility. Click here [out] to see pictures of all of the Warm Up Don'ts listed in this article

Stretching Don't #3: The Iron Cross The Iron Cross is basically a more dynamic version of the hip cross over. Therefore, based on what I just told you, it should be obvious why it's a Stretching Don't. The Iron Cross is actually the most poorly designed and dysfunctional movement on my hit list. This movement not only requires excessive lumbar rotation, but also adds a small element of lateral flexion to the mix, as a byproduct of lifting the leg toward the opposite hand. Any mighty bodily therapist will tell you that combining spinal lateral flexion with rotation, especially under load, will put you on the fast track to disc injury. This is mentioned by Gregory S. Kolt and Lynn Snyder-Mackler in their book bodily Therapies in Sport and rehearsal (2003): "The mechanism of back injury in athletes is ordinarily the same as in the normal people (i.e. Prolonged and or repeated spinal flexion, flexion and rotation under load)." (p. 250) In the book Fact and Fallacies of Fitness(2003), Mel Siff also makes this point very clear: "The compound of lateral bending and rotation constitutes one of the most perilous maneuvers for the lumbar spine." (p. 89)

Siff than continues to make a very foremost point and construe why rotary training exercises are much safer and more functional when performed in an upright position. "A obvious degree of compressive preloading locks the facet assembly of the spine and makes it more defiant to torsion. This is the infer why trunk rotation without vertical compression may cause disc injury, whereas the same movement performed with compression is significantly safer." (p. 89) My spider-sense tells me that someone out there are saying, "Oh, come on now, Nick. actually the exercises you've described in Warm Up Don'ts 1 to 4 can't possibly create adequate force to cause any principal pain or dysfunction." Well, bubba, just feast your eyes on the study below, and you'll see why this line of mental is flawed. A investigate study took thirty-eight normal wholesome young subjects (14 males, 24 females) with mean ages of 23 years (males) and 21 years (females), performed 36 functional rotational tasks of the trunk. The subject's lower extremities were stabilized in a stabilizing platform, allowing the whole appeal of flexion-rotation and extension-rotation to take place in the trunk. Of these tasks, 18 were isometric and the other 18 were isokinetic. The isometric tasks consisted of flexion-rotation and prolongation rotation from a 20, 40 and 60 flexed trunk in 20, 40 and 60 of axial rotation. The isokinetic action consisted of flexion-rotation and extension-rotation from upright and flexed postures respectively in 20, 40 and 60 rotation planes at 15, 30 and 60 /s angular velocities.

The results revealed that the males were significantly stronger than females and isometric activities produced significantly greater torque compared to isokinetic efforts. The degree of trunk flexion was not significant; the angle of rotation, although significant, had only a small effect. The 60 trunk rotation was significantly different from 20 and 40 of trunk rotation. (Kumar S.; Narayan Y.; Zedka M., vigor in combined motions of rotation and flexion/ extenson in normal young adults, Ergonomics Volume 41, whole 6, 1 June 1998, pp. 835-852, Taylor & Frances Ltd.) Pay single attention to the terminal statement: "Based on the results and analysis, it is recommend that the appeal complicated rather than the torque may have a consequential corollary in the precipitation of back injuries." This statement clearly explains that dysfunction can be created just by consuming the spine in a non-functional manner regardless of load. So, as in the theme of this article, it's imperative that we do our investigate and choose our exercises wisely. Closing Remember what I said at the introduction: "If it doesn't make scientific sense, and it defies base sense, then it's probably nonsense." Let's face it, with all of the new training methods, styles, systems and opinions out there, it can be difficult to determine what's actually good and what's actually good for nothing. Use this minuscule religious doctrine and the decision will become much easier.

popular Warm Up and Stretching Exercises That Suck

Recommend : Band Saws Woodworking Tools Routers Shears & Nibblers

Wednesday, June 27, 2012

PlayStation Move divulge

Remember when the Wii came out. Sony smashed it saying it was a silly thing to swing a remote at a Tv. But the white remote sold millions and now Sony has come with an talk and it's called the PlayStation Move. A black torch shaped controller with a disco ball on top. It came out September 15th 2010 and I've checked it out.

Starter pack

Combination Disc & Belt Sanders

Most customers will probably hit the shops just to find a whole shelve worth of Move controllers and accessories. And frankly I think most don't even know what they need to buy to get the full experience. Well for those people, along with me, Sony has released a starter pack with Ps eye (needed for controller tracking), a move controller and a demo disc containing only article also available in the Ps store.

PlayStation Move divulge

Best Price RIKON 50-120 6-by-48-Inch Belt 10-Inch Disc Sander


RIKON 50-120 6-by-48-Inch Belt 10-Inch Disc Sander Feature

  • Solid steel and cast iron construction
  • 3/4-Horsepower motor
  • Belt speed 2030 sfpm
  • Disc speed 1720 rpm
  • Disc table 4-by-8-Inch

RIKON 50-120 6-by-48-Inch Belt 10-Inch Disc Sander Overview

Model 50-120 - Rikons 6" x 48" belt, 10" disc sander operates both vertically, horizontally and any angle in between. Unlike most of the other sanders on the market, the 10" disc is positioned so it does not protrude above the belt. This allows you to sand larger stock without interference. Convenient quick release belt tension lever and single tracking knob allow for easy, accurate belt alignment. An accessory work support is included for working in the 90 degree vertical position. The large 8" x 14" cast iron table tilts to 45 degrees and includes a standard 3/8" x 3/4" T-slot. Other features include: 3/4 HP, 110V induction motor, 2-1/2" dust port and heavy duty miter gauge. At 104 lbs. the heavy duty cast iron base adds stability to this sander.

RIKON 50-120 6-by-48-Inch Belt 10-Inch Disc Sander Specifications

With a durable base that minimizes vibration, the RIKON 50-120 6-Inch by 48-Inch Belt/10-Inch Disc Sander gives you options for sanding small and large stock at a variety of angles. Accessories, such as the heavy-duty miter gauge and work tables for both the belt and disc sander, allow you to easily sand straight and beveled edges, ends, and curves.

callout box top

50-120 6-Inch by 48-Inch
Belt/10-Inch Disc Sander
At a Glance:
  • Belt sander and disc sander in one convenient machine

  • Cast iron construction for vibration-free operation

  • Belt sander tilts between 0 and 90 degrees

  • Large disc sander includes heavy-duty tilting work table useful for beveled edges

  • Two-year limited warranty
callout box bottom
RIKON 50-120 6- by 48-Inch Belt/10-Inch Disc Sander
Industrial-sized sander has belt and disc sanding options. View larger.

Cast Iron Construction for Vibration-Free Operation
The heavy-duty, cast iron base weighs in at a sturdy 104 pounds and provides stable support to minimize vibrations in your work. Convenient carry handles increase portability, while pre-drilled holes allow for quick and easy mounting in the bench-top position.

Tilting Belt Sander Increases Versatility
With a belt sander size of 6 by 48 inches, a tilting range of 0 to 90 degrees, and an included work support table, the 50-120 lets you sand most any surface comfortably and efficiently. For smaller stock, set the belt sander in its home position and place the end of the stock against the table as a guide. If you're sanding larger stock, you'll want to remove the table for increased space. Inside curves are easy when you sand against the end of the belt, and it works well to sand end pieces with the belt tilted up at 90 degrees.

Quick Belt Adjustments for Efficient Work
The RIKON Belt/Disc Sander features a convenient quick-release belt-tension lever for fast and efficient belt changes. Once installed, a single tracking knob can be used to easily adjust the tension and position of the belt for accurate belt alignment.

Disc Sander with Work Table
With the largest disc size in its class, the 10-inch disc sander is used for sanding small end surfaces, outside curves, and beveled edges. A large 4-inch by 8-inch solid cast iron table tilts to 45 degrees with a simple loosening and retightening of the table lock knob. You can use the handy scale imprinted on the table support to guide you to the correct position.

A heavy-duty miter gauge is included, giving you a better guide for use with small pieces.

Dust Port Helps Keep Workspace Clean
The 2-1/2-inch dust port is molded to gather dust from both the belt and the disc, and it helps keep your workspace clean.

3/4-Horsepower Motor Plus Reliable Sanding Speeds
RIKON's Belt/Disc Sander features a powerful, 3/4-horsepower motor that is totally enclosed and fan cooled for long life. The belt sander operates at a speed of 2,030 SFPM for fast and smooth results, while the disc sander's speed of 1,720 RPM provides increased torque and reliability.

Warranty Information
The RIKON 50-120 6-Inch by 48-Inch Belt/10-Inch Disc Sander is backed by a manufacturer's two-year limited warranty.

What's in the Box
RIKON 50-120 6- by 48-Inch Belt/10-Inch Disc Sander, two work tables (for belt and disc sander), miter gauge, switch key, parts needed for assembly, and owner's manual.


Available at Amazon Check Price Now!

Related Products

Customer Reviews




*** Product Information and Prices Stored: Jun 27, 2012 08:04:49

I unpacked the box and installed the camera. Comfortably it doubles as a headset, nice! And the camera allows for fun things like video chat or manufacture pictures for your game avatar.

The Move controller was equally easy to install. On the bottom there's a Usb port, for connecting and charging the controller, and the buttons have been perfectly placed near the glowing ball. New to PlayStation are two buttons, the move button and the trigger button. The move button is often used for choosing things or calibrating the controller, while the T button is exquisite for shooters or letting go of objects in a game.

The starter pack is a great move by Sony to get people started. And it's very competitively priced too at just €59,99. To put this into perspective, a Wii mote costs 40 (without camera and disc) and Microsoft Kinect will ship for a whopping €149,99! But I'd have liked to see an alternative starter pack with the navigational controller and charging dock included. They could've called it the "complete pack" or something.

Games

The demo disc includes Sony's sport game with loads of mini games, and a integrate of indie industrialized move titles and a few triple A demos of the likes of Heavy Rain and Tiger Woods 11. God my swing is bad!

Every game begins with a quick calibration session. It's a straightforward strengthen often as easy as pointing the move towards the Ps eye and pressing a button. I wonder though why the calibration is needful every singular time.

From the few games I could play I was very impressed with the precision and reaction of the controller. The sports title was a lot of fun. There's a Frisbee game and it picked up perfectly whether I was throwing backhand or forhand, also it registered the speed of my throw and the timing of my release.

Same goes for the table tennis game. You can even do a 360 twist with the racket by swirling the controller in your hand. A nice party trick!

The PlayStation Eye camera introduces other element of interaction. This small gadget comes into play with the likes of Singstar and Tv superstars. The latter I played a demo of. In the game you can make a profile using your own face. By manufacture a "neutral face", "smiling face" and "angry face" the game creates your own virtual mini me that react to anything happens in the game. It unmistakably is a lot of fun and currently on #1 on my Christmas evening meal entertainment list.

Downsides

So the controller is great, as is the camera and all for a competing price. One might wonder is this stock perfect? Well the talk tot that has to be no, it isn't. First of all the starter pack alone is not nearly enough to keep you going. Most games want whether two move controllers or a navigational controller to make it worthwhile. Add the costs of this, and a docking station, and you unmistakably end up spending €150+ on a set of controllers and accessories.

And the PlayStation eye is desperately bad at recording at low light. Use anything other than natural light and the camera will go berserk on the Iso count resulting in noise all over the picture. Not great when video chatting with grandma or playing games that projects virtual toys into your living room.

Conclusion

The PlayStation move is an fantastic controller. It's very literal, and unmistakably breaks down that wall between you and the games you're playing. Fun for the whole house one might say. Combined with the functionality of the PlayStation eye one can't go wrong with Sony's latest creation. Just be prepared to spend a lot of money on accessories to get the whole experience.

PlayStation move review

PlayStation Move divulge

Thanks To : home improvement Band Saws Woodworking Tools Lathes Routers Woodworking Tools Circular Saws Woodworking Tools

Tuesday, June 26, 2012

JET 708595 JSG-96 6-Inch/9-Inch 3/4-Horsepower Benchtop Belt/Disc Sander, 115-Volt 1-Phase

Best Price JET 708595 JSG-96 6-Inch/9-Inch 3/4-Horsepower Benchtop Belt/Disc Sander, 115-Volt 1-Phase


JET 708595 JSG-96 6-Inch/9-Inch 3/4-Horsepower Benchtop Belt/Disc Sander, 115-Volt 1-Phase Feature

  • 3/4-horsepower motor provides plenty of power to both sanders for even the heaviest jobs
  • Large 7-1/2-by-12-inch cast iron table has preset stops at 90-degrees and 45-degrees
  • Operates horizontally or vertically, or anywhere in between
  • Mount to a bench top or simply set on the bench for use
  • 1-year warranty

JET 708595 JSG-96 6-Inch/9-Inch 3/4-Horsepower Benchtop Belt/Disc Sander, 115-Volt 1-Phase Overview

Includes 6-in x 48-in Belt / 9-in Disc Combination Bench Top Sander - 708595, Sanding Belt, Sanding Disc, Miter Gauge, Horizontal Backstop, Circle Jig

JET 708595 JSG-96 6-Inch/9-Inch 3/4-Horsepower Benchtop Belt/Disc Sander, 115-Volt 1-Phase Specifications

Whether you're removing a large amount of stock or just making the finest changes, this Jet belt/disc sander is definitely up to the task. A 3/4-horsepower motor supplies all the power you need for serious stock removal, and the platen has a graphite sheet that helps keep things cool, so you get more life out of both the sander and the belts.

The 9-inch disc sander's table is a generous 7-1/2-by-12-inch cast iron surface, with preset stops at 45 and 90 degrees for reliable angles and nice miter gauge T-slots parallel and perpendicular to the disc. But even better, we think, is the belt sander that operates both horizontally and vertically -- and everywhere in between. The table isn't as large as that of the disc sander, but it's really not necessary, and it functions nicely as a work stop in the horizontal position. The only thing we don't like -- and it's a matter of preference, really -- is that we found the power switch awkward to reach when using the belt sander in the flat position, as it's on the other side of the tool.

Adjustments are all quick and easy, especially changing out the belt. All it takes is a flip of the quick-release belt tension lever, and you'll be back to work in a minute. Tracking is an easy task as well, one we appreciate that Jet made so simple. First, pull up the handle of the tracking lock, then just turn the adjusting knob until the belt is centered on the platen. Lock the handle again, but watch carefully: You may need to fine-tune with the knob again, as the belt tends to shift slightly to the left when the tracking lock is engaged again. Once centered, though, the belt will stay put, thanks to the rubber-coated drive drum that keeps a good grip on the sanding belt.

One of the things we liked best about this sander is its clean dust-collection setup. One 4-inch port on the base directs the lion's share of sawdust into your system, whether you're using the belt or the disc. There's even an integrated blast gate to direct the suction to whichever sander you're working.

This is a hefty machine, and though it's possible to bolt it to a workbench or buy a separate stand for it, it feels very stable when simply placed on a flat surface like a workbench, and in a smaller shop, that's a great advantage.

Fit and finish are, of course, excellent, as with any Jet tool, and any woodworker will find a thousand uses for this versatile, hardworking machine in the shop. --Kris Jensen-Van Heste

Available at Amazon Check Price Now!

Related Products

Customer Reviews




*** Product Information and Prices Stored: Jun 26, 2012 11:31:49

Recommend : home improvement Nailers Air Tools Pliers Hand Tools Table Saws Woodworking Tools